Section 8: Exposure controls/personal protection

8. Exposure controls/personal protection (1) For the purpose of this document exposure control means the full range of precautionary measures to be taken during use in order to minimise worker exposure. (2) Give additional information to that already given at paragraph 7 (1) on the system design e.g. enclosure so that engineering measures may be taken before personal protection equipment is necessary. (3) Indicate, with their reference, any specific control parameters such as occupational exposure limit values or biological limit values and give information on the recommended monitoring procedures and indicate the reference. (4) Where personal protection is needed, specify the type of personal protective clothing and equipment to provide adequate and suitable protection— (a) for respiratory protection in the case of dangerous gases, vapours or dust, consider the need for appropriate protective equipment, such as self-contained breathing apparatus, appropriate masks and filters; (b) for hand protection specify the type of gloves to be worn when handling the substance or preparation. If necessary indicate any additional skin and body protection measures; (c) for eye protection, specify the type of eye protection required such as safety glasses, safety goggles and face shield; (d) for skin protection, where it is necessary to protect a part of the body other than the hands, specify the type and quality of protective equipment and clothing required, such as apron, boots and full protective suit. If necessary, indicate specific hygiene measures.